Screens can be cleaned easily with a soft brush accessory from a vacuum cleaner. if a more thorough cleaning is desired and the screens need to be removed, follow these steps:  
  Double-hung

  1. From the interior, raise both sashes to their highest position.
  2. Raise the screen up to a point where you can get your hand on the lower aluminum frame section.
  3. Push the screen to the left side of the window. The screen has springs on theis side.
  4. Once the screen is positioned as far left as possible, gently push the right side of the screen toward the exterior.
  5. Once the right side is disengaged from the screen track, remove it from the left side as well.

To replace the screen to its tracks:

  1. The springs should be positioned on the left. Place the springs in the left screen track.
  2. Push the screen as far left as possible.
  3. Pull the right side in. Center it in the right screen track and reengage it in that track.
    
  To remove a screen on a roller window, simply pull up on the aluminum screen track bottom, placing it all the way up into the top screen track. Push out the bottom to clear the screen from the bottom screen track and disengage the screen at the top.

To replace the screen, reverse the above steps.

  

Entries and comments feeds. Valid XHTML and CSS. ^Top^
16 queries. 0.202 seconds.
Powered by WordPress with Custom Theme design by Higher Images, Inc..